How to Use Squeegee?

A squeegee is a tool used to remove excess liquid, such as water or cleaning solution, from a hard surface. To use a squeegee correctly:

1) Start at the top of the window and pull down in one smooth motion.

2) Wipe away any excess moisture on the edge with a dry cloth.

3) Move left to right across the window in overlapping strokes, allowing the rubber blade to glide easily over it

4) When finished wiping down all surfaces, lift off the blade and clean it with warm soapy water

5) Hang up your Squeegee and store for future use.

6). Use an extension pole if necessary when working at high windows or ceilings.

Following these steps will help you get professional-looking results with minimal effort every time you use your squeegee!

  • Step 1: Choose the right squeegee for your job
  • Squeegees come in a variety of sizes, shapes, and materials
  • Consider the size of your window and what type of material you will be cleaning—glass or tile—when selecting one
  • Step 2: Fill a bucket with warm water
  • Add a mild dish soap to create suds if necessary for tougher dirt or grime on windows or glass tiles
  • Step 3: Dip the squeegee into the soapy water and wipe it onto the surface you want to clean in an up-and-down motion
  • Make sure to rinse off any excess soap as you go along so that there is no residue left behind when finished cleaning Step 4: After all surfaces have been wiped down with the squeegee, use a dry cloth or towel to remove any remaining moisture from glass surfaces and finish off by polishing them with newspaper for extra shine!
How to Use Squeegee?


What is the Best Way to Clean Windows With a Squeegee?

When cleaning windows with a squeegee, it is important to start by gathering the necessary supplies. You will need a bucket of warm water and some window cleaner or soap. Additionally, you should use a clean cloth or sponge to wipe down the edges of the window before using your squeegee.

Once everything is prepared, dip your squeegee into the soapy water and begin wiping down from top to bottom in even strokes. Make sure that you overlap each stroke slightly so that no streaks are left behind. After completing each stroke, wipe off any excess moisture on either side of the blade with a dry cloth or rag before making your next pass across the window surface.

When finished, be sure to rinse off any remaining soap residue with clean water and then buff away any leftover streaks with an absorbent towel for streak-free windows!

How Does Squeegee Work?

A squeegee is a tool used to remove excess liquid from a surface. It consists of a handle attached to a rigid blade, usually made of rubber or polyurethane. The user holds the handle and drags the blade across the surface; this action pushes any standing liquid away, leaving only a dry area behind.

Squeegees can be used for windows, floors and other smooth surfaces where water or other liquids may accumulate. They are commonly found in cleaning supply stores and hardware shops in various sizes depending on their intended use.

Where Should You Begin Cleaning While Using a Squeegee?

When cleaning with a squeegee, it is important to begin at the top of the window and work your way down. This allows for any dirt or debris that may have gathered on the window to be removed as you move downwards. It also allows for any water left behind from the squeegee to run off and avoid pooling at the bottom of the window.

Begin by starting in one corner and make sure to use overlapping strokes when wiping across each section of glass. Make sure not to press too hard as this can cause streaks while cleaning, but ensure adequate pressure is applied so that all debris is successfully removed from your windows.

Can You Use Windex And a Squeegee?

Yes, you can use Windex and a squeegee to clean windows. The combination of the two products is one of the most effective ways to keep your windows streak-free. To get started, spray Windex on the window and then use a squeegee in an S-shaped motion from top to bottom.

After each stroke, wipe off any excess fluid with a dry cloth or paper towel before moving on to the next section. Doing so will help prevent streaking and ensure that your windows are left sparkling clean!

How To Use a Squeegee – Window cleaning tips

How to Use a Squeegee on Floors

When it comes to cleaning your floors with a squeegee, start by wetting the squeegee and then running it across the floor in even strokes. Be sure to keep the blade at an angle—a 45-degree angle is best—so that you can effectively pick up dirt and debris as you go. After each pass, rinse off the squeegee and repeat until all of your floors have been thoroughly cleaned!


Cleaning windows may seem straightforward, but mastering the squeegee can transform this mundane task into art. The key is in the technique. Start by dipping your squeegee in soapy water. Hold it at a 45-degree angle to the glass, applying gentle pressure. Begin at the top corner, gliding smoothly down in a single stroke. For best results, overlap each stroke slightly and wipe the blade after each pass. Remember, the secret lies in consistent pressure and angle. By following these simple steps, you can achieve sparkling, streak-free windows that enhance the beauty of your home.

Similar Posts