How to Use a Squeegee on Mirrors?

Using a squeegee on mirrors is relatively simple. First, use a mild soap and warm water to clean the mirror surface. Rinse it off with clean, cool water.

Then apply glass cleaner to the mirror and spread evenly over the entire surface with a lint-free cloth. Take your squeegee and start at one side of the mirror, holding it in an angled position against the wet glass. Gently pull it towards you while applying light pressure until you reach the other side of the mirror.

Wipe off excess liquid from blade by running it along an absorbent towel or rag after each stroke across mirror before continuing onto next section of glass until entire area has been wiped down with squeegee. Finally, finish cleaning process with another pass using a dry cloth for streak-free results!

  • Prepare the Squeegee: Start by dampening a microfiber cloth with warm water, then wring it out until it’s just slightly damp
  • Place the squeegee on top of the cloth and slide it back and forth to lightly coat both sides of the rubber blade with water
  • This will help prevent streaking when you use it on your mirror or window later
  • Begin at the Top: Hold the squeegee in one hand, and start from the top corner of your mirror or window moving downward toward yourself in one smooth stroke
  • Gently run over each area once, using light pressure as you go
  • Make sure not to overlap strokes too much since this can create streaks instead of a clean streak-free finish! 3
  • Wipe Away Residue: After each stroke, wipe away any excess liquid that is left behind using a dry microfiber cloth before continuing down to cover more surface area with your squeegee motion
  • This will keep streaks from forming on your mirrors or windows due to residual moisture left behind after each swipe of the squeegee blade has been completed! 4 Finish Up: Once you have wiped all areas that need cleaning thoroughly with your squeegee technique, use another dry microfiber cloth to buff away any remaining residue and make sure there are no smudges or streaks left behind! Your mirrors should now be looking shiny and streak free!
How to Use a Squeegee on Mirrors?


Can You Use a Window Squeegee for a Mirror?

Yes, you can use a window squeegee for a mirror. A window squeegee is made of rubber or foam and is typically used to remove water and dirt from windows. However, it can also be used on mirrors as well.

It’s best to use a soft microfiber cloth with the squeegee in order to avoid scratching or damaging the surface of your mirror. To use the squeegee, start at one edge of the mirror and draw the blade across it in even strokes until you reach the other side of the mirror. This will help ensure that all dust and residue are removed from its surface without leaving any streaks behind.

What is the Best Way to Clean Mirrors?

The best way to clean mirrors is by using a combination of warm water, white vinegar, and a microfiber cloth. Start by mixing equal parts of warm water and white vinegar in a spray bottle. Lightly mist the mirror with the mixture and use your microfiber cloth to gently wipe away any dirt or grime.

If needed, you can use a soft-bristled brush to help remove tougher spots. Finally, rinse off the mirror with clean tap water before drying it off completely with a separate dry microfiber cloth. This method will ensure that your mirrors are sparkling clean without leaving behind any streaks or residue.

What is the Best Way to Clean Mirrors Without Streaking?

The best way to clean mirrors without streaking is to use a combination of two cleaning solutions: a homemade solution consisting of 1/2 cup vinegar mixed with 1 quart warm water, and a commercial glass cleaner. To start, spray the mirror with the homemade solution and wipe in an up-and-down motion using a microfiber cloth or newspaper. The vinegar will dissolve any dirt while also helping to reduce streaks due to its non-abrasive nature.

Once you’ve wiped down the entire surface, use the commercial glass cleaner on another microfiber cloth or paper towel and wipe it in an S shape pattern across the mirror; this technique helps ensure that every spot gets cleaned properly without leaving behind any streaks. Lastly, buff dry with a soft lint free cloth for crystal clear results!

How Do You Clean Glass With a Squeegee?

To clean glass with a squeegee, start by wetting the squeegee blade and wiping it across the surface of the glass in long strokes. Start at the top corner and work your way down. Make sure to overlap each stroke slightly as you go so that no streaks are left on your window or mirror.

If necessary, use a mild soap solution mixed with warm water to help break up dirt or other debris from the surface of the glass before applying your squeegee. Once all visible dirt is removed, dry off any excess moisture with a soft cloth or paper towel for streak-free results!

Mirror Cleaning Hack: Window Cleaning Mop & Squeegee Gets The Best Results Every Time!

How to Clean Mirrors Without Vinegar

Cleaning mirrors without the use of vinegar is easy and can be done with a few common household items. To begin, mix warm water and dish soap in a bucket or bowl. Use a soft cloth dipped in the solution to clean the surface of your mirror, wiping it gently in circular motions.

Once you’ve removed any dirt or grime from your mirror, rinse off any remaining residue with clear warm water using another soft cloth. Finally, dry your mirror completely using lint-free paper towels or chamois cloths for a streak-free shine!


Using a squeegee on mirrors is an effective and economical way to keep your bathroom looking clean and streak-free. The key is to use the correct technique, working from top to bottom in overlapping strokes and wiping off any excess water with a microfiber cloth. With regular maintenance, you can keep your mirrors shining like new for years to come!

Similar Posts