What Size Squeegee for Screen Printing?

The size of squeegee needed for screen printing depends on the type and size of garment being printed. Generally, a 10 inch or 12 inch squeegee is suitable for most garments. However, if you are printing larger items such as banners or signs, then a 14 inch or 16 inch squeegee may be necessary to cover the entire area.

Additionally, it is important to consider the mesh count when selecting your squeegee; a higher mesh count requires a harder blade with more pressure applied during printing whereas lower mesh counts require less pressure and softer blades. Ultimately, choosing the right size of squeegee will depend on what you are trying to achieve from your print job – so make sure to take all factors into consideration before deciding which one is best suited for your project!

When it comes to screen printing, selecting the right squeegee size for your project is essential. The size of the squeegee should correspond with the mesh count and stencil thickness used in a particular job. Generally, fine detail work requires a narrower blade width that provides more control over pressure applied and ink deposit, while larger prints require wider blades that enable better coverage over a larger area.

Choosing an appropriate squeegee size will help ensure proper print quality and reduce excess waste from botched prints.

Screen Printing T-Shirts: What’s The Best Squeegee Durometer & Size?

How Big Should My Squeegee Be?

When choosing a squeegee, size is an important consideration. The optimal size of the squeegee will depend on the surface you are cleaning and the type of material being used for wiping. Generally, a smaller squeegee may be better suited for working in tight spaces or with small surfaces, while a larger squeegee may be more effective when cleaning large areas such as windows or walls.

If using a rubber-edged tool to clean glass, it’s best to choose one that is slightly longer than the width of your window; this allows you to reach all parts without having to overlap strokes. When dealing with uneven surfaces like tile floors or countertops, selecting a wider blade can help ensure that all dirt and debris are collected without leaving any streaks behind. Ultimately, experiment with different sizes until you find the right fit for your needs!

What Kind of Squeegee Do You Use for Screen Printing?

The best squeegee for screen printing is typically a medium to hard durometer (measurement of rubber hardness) with a sharp edge, such as those made from urethane or polyurethane. For most jobs, you’ll want to use a squeegee between 70 and 80 durometers. The size of the blade will depend on the job, but it should be wide enough to cover the entire length of your print surface in one pass.

A good quality squeegee will ensure an even application of ink and won’t cause any smearing or streaking on your printed garments.

What is a 70 90 70 Squeegee?

A 70/90/70 squeegee is a specialized glass cleaning tool that is designed to quickly and effectively clean flat surfaces such as windows. It consists of three rubber blades: the 70, 90, and 70 mm sizes refer to their respective widths. The first blade removes dirt and debris while the second blade applies water evenly across the surface.

Finally, the third blade wipes away excess moisture and ensures a streak-free finish on your window. This type of squeegee is often used by professional window cleaners due to its superior ability to get windows looking crystal clear in no time at all!

Do You Need a Squeegee for Screen Printing?

Yes, a squeegee is an essential tool for screen printing. The squeegee is used to spread a thin layer of ink evenly across the surface of the screen, creating sharp and precise images that are free from defects. It also helps to ensure that there are no air bubbles or areas with too much ink which can lead to uneven results.

A good quality squeegee should be made from durable materials such as polyurethane or rubber and they come in a variety of sizes depending on the size of your project. As well as helping you achieve better results, using a squeegee will help to protect the longevity of your screens by preventing any damage caused by applying too much pressure when pushing down with an applicator sponge or brush.

Credit: systauto.com

80 Durometer Squeegee

An 80 durometer squeegee is a rubber blade used in the printing industry to spread ink evenly across a substrate. It is made up of two parts: an aluminum handle and an elastomeric blade that can be calibrated for different levels of hardness, with 80 durometer being one of the hardest blades available. As such, it is ideal for use on more challenging substrates like plastics or textured surfaces, ensuring consistent results every time.

Conclusion

Overall, it is clear that the size of your squeegee is an important decision when screen printing. Depending on your project and goals, you may choose a different length or durometer rating to best suit the job. With all of these factors in mind, you can select the ideal squeegee for any screen printing need.