What Durometer Squeegee for Shirts?
The durometer of a squeegee for shirts is an important factor to consider when choosing the right one. Generally, you should choose a squeegee that has a durometer rating between 55 and 85 Shore A. This range will allow the squeegee to be flexible enough to conform to the surface of your shirt while still having enough stiffness so as not to damage it during application. If using water-based inks, then go with something slightly softer; if using plastisol inks, then opt for something slightly harder.
Additionally, when printing on more delicate fabrics like cotton or linen, lower durometers are preferred over higher ones because they provide better coverage without risking damaging the fabric’s fibers.
When it comes to finding the right squeegee for printing t-shirts, a durometer is an important factor to consider. A durometer measures the hardness of a material and is usually measured on a scale from 0 (softest) to 100 (hardest). For shirt printing applications, most screen printers prefer to use blades with a hardness between 60 and 70 on the Shore A scale as this provides just enough rigidity for long lasting prints without damaging or gouging your screens.
Screen Printing Basics – Squeegees – What ‘Durometer’ is Best For You?
What is the Best Squeegee for Fabric?
When it comes to fabric, the best squeegee for the job is one that has a soft rubber blade. This type of squeegee will be gentle on delicate fabrics while still providing enough pressure to remove dirt, dust and other particles from their surface. Additionally, you should look for a squeegee with an ergonomic handle that allows you to easily maneuver it around fabric without straining your hand or wrist.
Finally, make sure the model you choose is lightweight so that it’s easy to move around as needed.
What is the Best Duro for Squeegee?
When it comes to choosing the best duro for squeegee, there are a few factors you should consider. The most important factor is the material of the blade. Soft blades will give you better control and flexibility while hard blades will provide greater durability and strength over time.
You also need to consider the size of your application – larger applications may require a harder duro than smaller ones. Generally, anything between 50-80 Shore A is suitable for squeegeeing but if your project requires extra precision then a 70-90 Shore A would be ideal. It’s also worth bearing in mind that softer durometer squeegees tend to wear out faster than harder ones, so keep this in mind when making your choice too!
What is a 70 90 70 Squeegee?
A 70 90 70 squeegee is a versatile tool used in the printing industry for various tasks. It consists of three parts: a handle, a blade and an angled edge. The handle allows for easy maneuvering of the squeegee, while the blade is made from durable rubber that can easily clean excess ink or other liquids from surfaces.
The angled edge ensures optimal contact with surface areas when pressure is applied with the rubbery material. This type of squeegee makes it easier to achieve consistent quality results with less waste than traditional methods such as chiseling or casting processes. Additionally, due to its size and shape, this type of squeegee can be used on both flat and curved surfaces alike making them ideal for screen-printing applications where accuracy matters most.
What Kind of Squeegee Do You Use for Screen Printing?
When it comes to screen printing, the type of squeegee you use can make a big difference in the end result. Generally speaking, for most screen printing projects, a 70 durometer squeegee is recommended. This means that the material has a hardness rating of seventy on the Shore A scale and offers good flexibility for print quality and durability.
Other factors such as blade width, angle and shape should also be considered when choosing a squeegee; however, if you are just starting out with screen printing then opting for something like an aluminum or plastic handled rubber-blade squeegee will suffice. You may want to experiment with different types of blades until you find one that works well with your particular setup and ink type.
Credit: www.silkscreenprintingsupply.com
70 Durometer Squeegee
The 70 Durometer Squeegee is the perfect choice for a broad range of screen printing and graphic applications. Its unique combination of hardness and flexibility allows it to easily conform to uneven surfaces while providing even pressure distribution, making it an ideal tool for applying large graphics to irregular surfaces. Furthermore, its durable rubber compound ensures long-lasting performance with minimal wear over time, allowing you to get more out of your investment.
Conclusion
In conclusion, the type of squeegee used for screen printing shirts is determined by a variety of factors, including the material being printed on, the type of ink and other materials being used in production. Durometer hardness is an important indicator to consider when selecting a squeegee for shirt printing projects. A higher durometer rating usually indicates that the blade will hold its shape longer and provide more consistent results.
Although trial and error may be necessary to determine which option works best for any given project, understanding durometer ratings can help make sure you get the most out of your squeegee.
