How to Replace Ettore Squeegee Blade?

To replace an Ettore squeegee blade, start by unscrewing the screws at the base of the handle and removing it. Then, push down on the top of the squeegee frame to release it from its holder. Next, grasp each side of the worn out rubber blade and pull to remove it from its grooves in the metal frame.

Insert a new replacement rubber into both sides of this same groove in one smooth motion until fully seated. Finally, reattach your handle back onto your frame with screws and you are ready to go!

  • Step 1: Choose the Correct Blade – Select an Ettore squeegee blade that is compatible with your handle
  • Be sure to choose a quality product made from durable material, such as stainless steel or rubber-coated plastic
  • Step 2: Remove the Old Blade – Gently twist and pull off the old blade from the frame of the squeegee handle
  • If necessary, use pliers to help loosen and remove it
  • Step 3: Attach New Squeegee Blade – Align one end of new blade into slot at top side of frame on handle
  • Push down firmly until bottom part of blade snaps into place in lower slot
  • Step 4: Test Out Your New Squeegee Blade – Make sure all parts are securely locked in place before using your newly replaced Ettore squeegee blade
How to Replace Ettore Squeegee Blade?


How Do You Change a Squeegee Blade?

To change a squeegee blade, start by removing the existing blade with a pair of pliers. Be sure to use caution when doing this as you don’t want to damage the rubber frame. Once the old blade is removed, carefully measure and cut a new one from an appropriate material such as polyurethane or neoprene.

Make sure that your measurements are accurate so that it fits properly in the frame before affixing it with adhesive or screws depending on what type of squeegee you have. Afterwards, test out your newly installed squeegee blade and make any necessary adjustments for better performance.

How Do You Change the Rubber on an Ettore Squeegee?

To change the rubber on an Ettore squeegee, start by loosening the screw at the top of the handle. Once that is done, use a flathead screwdriver to carefully pry up and remove the existing rubber blade from its holder. Once it’s been removed, insert your new replacement blade into place, making sure that all four sides are properly secured in place.

How Do You Use Ettore Squeegee Off?

Using an Ettore squeegee off is easy and effective. First, wet the window or glass surface with a squeegee. If you are using a glass cleaner, spray onto the window or surface first before wetting it with your Ettore squeegee off.

Then start at the top of your glass and pull down in long strokes across the entire length of the window. Continue this process until you have worked your way down to the bottom of the window where excess water will collect for removal with a towel or cloth. Finish by wiping away any remaining water spots on each pane from left to right using either a dry microfiber cloth or another clean rag to ensure that all streaks are removed!

How Often Should I Replace Squeegee Rubber?

The frequency with which you should replace your squeegee rubber depends on the type of material it is made from, how often you use it, and what tasks you are using it for. Generally speaking, natural rubber squeegees should be replaced every two to three months if used regularly; however, high-grade synthetic rubber blades can last up to a year or more. It’s also important to inspect your squeegee after each use and look for signs of wear such as cracking or splitting that may indicate that replacement is needed sooner.

If in doubt, consider replacing the blade at least once a season – this will ensure optimal performance and help extend the life of your squeegee.

Window Cleaning Tips: How to Change your Squeegee Channel Rubber

Ettore Squeegee Replacement Rubber 16 Inch

The Ettore Squeegee Replacement Rubber 16 Inch is a great tool for any window cleaning job. This durable and flexible rubber blade is designed to fit most standard squeegees and can be used for both indoor and outdoor applications. Its high-quality construction ensures that it will last through multiple uses, making it an economical choice for busy professionals or DIY enthusiasts alike.

With its easy installation, you’ll have your windows looking sparkling clean in no time!


Replacing your Ettore squeegee blade is an easy task that can be completed in just a few steps. With the right tools and the correct technique, you can extend the life of your squeegee and keep it in great condition for years to come. By following these simple instructions, you will have no problem replacing your old blades with new ones quickly and efficiently.

Similar Posts