How to Clean Squeegee?

To clean a squeegee, start by wiping down the rubber blade with a damp cloth to remove any dirt and debris. Then rinse the entire squeegee in warm water and use mild detergent or dish soap to scrub off any remaining dirt. Rinse the squueegee again to remove all of the soap residue.

Finally, dry off the squeegee thoroughly with a clean towel before storing it away for future use. Make sure you only use gentle cleaning solutions on your squeegee so as not to damage it, and avoid using anything abrasive like steel wool that could scratch or dull its surface. For added protection, periodically apply lubricant oil on both sides of the rubber blade in order to keep it from becoming stiff over time.

  • Prepare the cleaning solution: Fill a bucket with warm water and add a few drops of mild dish soap or other non-abrasive cleaner to it
  • Rinse the squeegee: Dip the squeegee in the soapy solution and rub gently using your hand, then rinse off with clean water
  • Remove excess dirt: Use an old toothbrush or scrub brush to remove any tough dirt or debris from the squeegee blade and handle
  • Dry completely: Wipe down both sides of the squeegee blade with a soft cloth to make sure all moisture is removed before storing away for future use
How to Clean Squeegee?


What is the Best Way to Clean a Squeegee?

The best way to clean a squeegee is to start by rinsing it off with warm, soapy water. Next, use a cloth or sponge dipped in the same soapy solution to wipe down the blade of the squeegee and remove any stubborn dirt or debris. Finally, rinse off the squeegee thoroughly with fresh water and allow it to air dry before using again.

Additionally, you may want to occasionally disinfect your squeegee after cleaning if it’s been used for any potentially hazardous tasks such as window-washing near a construction site or other area where there could be potential contaminants present.

How Do You Maintain a Squeegee?

Maintaining a squeegee is essential for ensuring it lasts and works properly. Start by cleaning the blade of your squeegee with warm water, detergent and a soft cloth to remove any dirt or residue that has built up. Once the surface of the blade is clean, apply a few drops of vegetable oil along its length to keep it lubricated.

You should also regularly check if there are any cracks in the rubber or other damage to the squeegee itself and replace it immediately if necessary. Additionally, storing your squeegee in an upright position can help prevent warping over time as well as keeping it away from direct sunlight which may cause fading.

How Do I Stop My Squeegee from Streaking?

When it comes to avoiding streaks when using a squeegee, preparation is key. First, make sure that the surface you are cleaning has been properly washed or wiped down with an appropriate cleaner so as to remove any dirt and debris that may be present. Secondly, use plenty of water on your squeegee blade itself before beginning the task at hand – this will help ensure that all dust particles have been removed from the blade prior to use.

Lastly, take care not to move too quickly while wiping down surfaces – instead, glide your squeegee slowly in one direction at a time and apply steady pressure throughout each pass. With these tips in mind, you should be able to avoid leaving behind any unwanted streaks on your windows!

Why is My Squeegee Leaving Streaks?

Streaks on a window can be caused by many different things, but one of the most common culprits is an improper use of a squeegee. If your squeegee has too much water or soap on it, it will leave streaks as you clean the window. Additionally, if you don’t move the squeegee in straight lines and instead move it back and forth while cleaning, this will also cause streaks to form.

To ensure that no streaks are left behind when using a squeegee, make sure that there isn’t too much water or soap on it and always pull the tool across the glass in straight lines with even pressure applied throughout.

How To Screen Print: Cleaning & Maintaining Squeegee Tips

Homemade Window Washing Solution for Squeegee

Using a homemade window washing solution is an economical and eco-friendly way to keep your windows squeaky clean. This simple recipe consists of just a few ingredients: 1 cup of white vinegar, 1 gallon warm water and 2 tablespoons liquid dish soap. Mix the ingredients in a bucket until combined, then use with a squeegee for streak-free results.

The vinegar will help cut through dirt and grime while the dish soap helps reduce streaks and spots on the glass.


Overall, cleaning a squeegee is an easy and straightforward process. With just a few simple steps and the right supplies at hand, you can quickly have your squeegee back in working order. Whether you’re using it to clean windows or walls, taking the time to properly clean your squeegee ensures that it will be ready for its next job.

Similar Posts